Chaintech 5TTL

by Anand Lal Shimpi on July 20, 1997 2:08 PM EST
The Test

In recent times, choosing a motherboard cannot be completely determined by a Winstone score. Now, many boards come within one Winstone point of each other and therefore the need to benchmark boards against each other falls. Therefore you shouldn't base your decision entirely on the benchmarks you see here, but also on the technical features and advantages of this particular board, seeing as that will probably make the greatest difference in your overall experience.

How I Tested

  • Each benchmark was run a minimum of 2 times and a maximum of 5 times, if the motherboard failed to complete a single test within the 5 allocated test runs the OS/Software was re-installed on a freshly formatted Hard Drive and the BIOS settings were adjusted to prevent the test from failing again.  All such encounters were noted at the exact time of their occurrence.

  • Business Winstone 97 / Business Graphics Winmark 97 was run at each individually tested clock speed, if reliable scores were achieved with the first two test runs of the suite an average of the two was taken and recorded as the final score at that clock speed.  If the test system displayed erratic behavior while the tests were running or the results were incredibly low/high the tests were re-run up to 5 times and an average of all the test runs was taken and recorded at the final score at that clock speed

  • Business Winstone 98 / Business Graphics Winmark 98 was run on the Pentium MMX at 233MHz, and the AMD K6 at 233MHz, the averaging rules for these tests are the same as those used for the 97 test suites. 

  • After each motherboard was tested a complete format of the test hard drive was initiated and the OS/benchmarking software was re-installed afterwards a defragment was initiated using Windows 95's Disk Defragmentation Utility

  • No foreign drivers were present in the test system other than those required for the system to function to the best of its ability

  • All foreign installation files were moved to a separate partition during the test as to prevent them from effecting the test results

  • All tests were conducted at 800 x 600 x 256 colors

Test Configuration

Processor(s): AMD K6/233 ANR & Intel Pentium MMX 233 & Cyrix 6x86MX-PR2/200
Board Revision: 1.01
RAM: 2 x 32MB Advanced Megatrends SDRAM DIMMs
2 x 32MB Corsair Microsystems SDRAM DIMMs
2 x 32MB SmarTech SDRAM DIMMs
Hard Drive(s): Western Digital Caviar AC21600H
Video Card: Matrox Millennium (2MB WRAM)
Busmaster EIDE Drivers: Intel 3.01
Video Card Drivers: MGA Millennium
OS: Windows 95 Service Release 2


Windows 95 Performance of the Chaintech 5TTL
CPU Business Winstone 97 Business Graphics Winmark 97
AMD K6/208 56.4 112
AMD K6/225 56.4 113
AMD K6/233 55.2 111
Cyrix 6x86MX-PR2/200 (150/75) 54.2 109
Cyrix 6x86MX-PR2/200 (166/66) 57.0 117
Cyrix 6x86MX-PR2/200 (166/83) 57.6 116
Intel Pentium MMX 208 53.7 109
Intel Pentium MMX 225 54.1 110
Intel Pentium MMX 233 52.4 107
Intel Pentium MMX 250 56.8 123
Intel Pentium MMX 262.5 56.2 120


Windows 95 Performance of the Chaintech 5TTL
CPU Business Winstone 98 Business Graphics Winmark 98
AMD K6/233 17.4 113
Intel Pentium MMX 233 16.6 108

As you can see, there is virtually NO difference between the Chaintech 5TTL and the 5TDM2 performance-wise, so in this case look towards the specifications of each individual motherboard before making a final decision.


The Final Decision

If you are an overclocking maniac, stay away from the 5TTL, however if you plan to do some light overclocking, and you feel that DIMMs are the wave of the future give the 5TTL a good look over.  ABIT's TX5/N series cannot offer you the immense memory expandability the 5TTL due to its 3 DIMM slots, however also keep in mind that when using above 64MB of RAM, the TX chipset will not cache any memory above the first 64MB, resulting in a 10 - 15% performance hit when using more than 64MB of RAM.

Comments Locked


View All Comments

Log in

Don't have an account? Sign up now