The Cooler Master MasterCase 5 Review
by E. Fylladitakis on August 27, 2015 9:00 AM EST- Posted in
- Cases/Cooling/PSUs
- Cooler Master
- mid-tower
- Case
- Freeform
The Exterior of the Cooler Master MasterCase 5
The MasterCase 5 is a modern design, based on simple shapes and geometric patterns. It appears based on the first Cooler Master Scout case, but it is more serious and elegant. The entirely of the case, metal and plastic parts alike, is sprayed with a satin black paint. Cooler Master did a fine job making sure that the paint is not significantly different between the plastic and metallic parts, creating a uniform, quality look. With a volume of 0.0659 m3 (65.9 liters), it is neither a small or large case as far as Midi-ATX towers are concerned, but do note that it is 23.5 cm (9.25") wide, which is significantly wider than typical ATX designs. It also tipped our scale at 10.4 kg, making it a fairly heavy case for the size.
The stock version of the MasterCase 5 has no windowed side panel, only the MasterCase Pro 5 does, but it is offered as an extra accessory. If purchased an installed, by default it will still be hiding the lowermost part of the case, where the PSU compartment is. If the system is very tidy, the black stripe hiding the PSU compartment can be removed, displaying the entirety of the system.
Cooler Master placed the front I/O ports and buttons at the top front of the case, on a tilted surface. Given that the case is rather tall, the position of the buttons and I/O ports clearly favors placement under a desk and makes the use of a windowed side panel questionable. The power-on button rests at the middle of the formation, with the 3.5 mm audio jacks above it and one 3.0 USB port on either side of them. A tiny square reset button can be seen to the right and a small HDD activity LED to the left.
The two handles at the top of the case appear to be plastic. Actually, their covers are plastic and the main frame of the handle is steel, directly attached to the main frame of the case too. They can easily handle the weight of the case and any system that may be installed inside it.
Removing the four large screws releases the metallic top cover of the case. The screw heads are very visually intrusive and made us wonder if the designer has never heard of countersunk screws. A simple nylon filter is placed beneath it; do not expect it to keep out too much dust. Two 120/140 mm fans can be installed on the metallic cover.
Cooler Master offers the top frame and cover of the MasterCase Pro 5 as an extra accessory for the MasterCase 5. It comes with the metallic frame that can fit two 120/140 mm fans, providing enough clearance for a liquid cooling radiator. Arguably, the MasterCase 5 looks much better with the extra top cover installed. The top cover does not block the handles and converts the area beneath the front handle into a simple storage department.
The rear of the MasterCase 5 reveals the position of the PSU compartment at the bottom of the case but is otherwise uninteresting for a modern design. There are no grommets or holes for custom liquid cooling solutions. A nylon filter is placed beneath the PSU fan intake and it can be removed by pulling it out towards the rear of the case.
At the bottom of the case, the feet resemble the handles found at the top of the case. They too are made of steel and attached to the main frame of the case, with plastic covers over them. The only difference is the long rubber feet on them that, strangely, appear somewhat worn on our brand-new sample.
32 Comments
View All Comments
Smudgeous - Thursday, August 27, 2015 - link
Their Node 304 is fantastic. I was able to move all 6 of my 3.5" drives from my previous midtower case into that little box, plus a pair of 2.5" SSDs I wedged on the floor. Granted, you'd have to remove a pair of 3.5" drives if you wanted to throw in a PCIe card, but the fact you have that ability in something so small is fantastic in my opinion.shadvich - Thursday, August 27, 2015 - link
You don't even need to wedge the SSDs on the floor. You can attach them to the two outer 3.5" mounts (so in between the case door and the drive mount).meacupla - Thursday, August 27, 2015 - link
Node 304 is pretty large at 19.5L. It can accommodate large video cards and a 14cm double tower cooler.Node 202 (new) is a failed design. Absolutely terrible cooling performance for what it can pack.
For ITX, Silverstone, hands down.
RVZ01/FTZ01: 14L, can pack some high power parts and still remain cool.
RVZ02/ML08: 12L, slimmer version of the above, but still allows for high power parts.
SG13: 11.5L, very difficult to top this case.
romrunning - Friday, August 28, 2015 - link
Agree on Silverstone - I love my little SUGO SG05!umaxtu - Monday, August 31, 2015 - link
So using your logic, the only car anybody in the world should be buying is a Honda Accord (Which has been on Car and Driver's 10 best list 29 times). Do you want every car company in the world to only make copies of the Accord?JonnyDough - Tuesday, September 22, 2015 - link
Both are designed to meet consumer needs while increasing revenue. It's a lot like buying parts of a video game, a little at a time until your total cost is far greater than just a game.vothr - Thursday, August 27, 2015 - link
I'm not sure what to think about this computer case. I would have to build a computer with it before I could give a proper opinion.usernametaken76 - Thursday, August 27, 2015 - link
Isn't that the point of reading multiple reviews before making a purchase? Of course after purchase anyone and everyone is entitled to their opinion, but what's the point of stating the obvious?jabber - Thursday, August 27, 2015 - link
I so love dusty perspex windows. How very last decade.theduckofdeath - Saturday, September 12, 2015 - link
The custom water cooling mods are getting more popular these days, which would justify putting a windows on it. Personally I'm happy with just having a padded metal lid, like on my Silencio 352, for the silence and also not having to see the cable mess I aways leave in my PC. :D