One of the most interesting launches from Western Digital last year was the WD Red line of hard drives from the client storage division. It was intended for low to mid-range NAS units (and WD wanted to make sure that it wasn't used for units with more than 5 bays). Today, the Datacenter Storage Business Unit is launching the WD Se line intended for high end NAS units and, more importantly, datacenters looking for scalable storage (i.e, reliable storage which doesn't cost an arm and a leg for scenarios where capacity, rather than performance, is of primary importance).

The WD Se line consists of 3.5" 7200rpm Advanced Format SATA drives in 2 TB (WD2000F9YZ), 3 TB (WD3000F9YZ) and 4 TB (WD4000F9YZ) capacities. All of these units have a 64 MB buffer. Pricing ranging from $160 at the low end to $310 at the higher end. Like the WD Re (and, unlike the desktop variants), the WD Se line has a self-encryption option. These drives come with the five year enterprise warranty. Western Digital touts the usage of WD Se drives in their own datacenter (with Apache Hadoop).

WD also advocates use of the WD Se drives in NAS units with 6 to 24 bays in both the desktop as well as rackmount form factors as a complement to the WD Red drives in the lower end units. In the datacenter, WD suggests usage of the WD Re and WD Xe drives for higher durability and performance. Note that the suggested workload for the WD Se is only 180 TB/yr, compared to 550 TB/yr for the WD Re, suggesting that WD is positioning this drive as a solution for backups, archiving and other low intensity tasks. On a comparative basis, the WD Red apparently has a workload rating of less than 100 TB/yr (the client storage division doesn't give out specific numbers) despite coming with a higher MTBF rating (1M hours compared to the 800K for the WD Se).

Some of the features of WD Se include dual processors to maximize performance, RAFF (rotary acceleration feed forward) to monitor and correct vibrations in real time (an issue common in datacenter environments), dual actuator technology to improve positional accuracy of the heads, StableTrac motor shaft securing at both ends to minimize vibrations, multi-axis shocks sensors, RAID-specific TLER (which we covered in the WD Red review) and dynamic fly height technology.

POST A COMMENT

23 Comments

View All Comments

  • lukewayne - Thursday, May 30, 2013 - link

    Ganesh, thanks for the article, is there a reason you put "Se" instead of "SE" ? Also "Re" was confusing if you were trying to be short for "Red" or referring to the old "RE" Raid Edition. I wish I would have known these were around the corner, I just picked up some Red drives because I didn't want to spend on RE drives. Reply
  • brshoemak - Thursday, May 30, 2013 - link

    Well, because they are called "Se" by Western Digital. There also was a WD Caviar SE drive in the past (before they started using colors of the rainbow) so I guess it's some sort of method of differentiation. Of course, if you type 'Western Digital Se hard drives" it will be awhile before the first results returned will be these new drives.

    btw, I keep hearing about this 5 drive limitation, that's just a suggestion from WD right? I mean they can't tell a RAID controller not to stripe across drives. What's the deal?
    Reply
  • Foeketijn - Saturday, June 1, 2013 - link

    I'd also love to see some failure rate nubers or percentage RMA's from the big sellers. Until then I can only say, I sold about a hundred RE/Raptor/Veliciraptor drives. One DOA (which had a dent on arrival) and the rest is, as far as I can tell still running. I can't say the same about the two to three hundred desktop drives. Of-course this isn't comparable since a semi (not SCSI/SAS) enterprise disk comes with a quality PSU and motherboard. And the fact that a 19" isn't very likely to be knocked over.
    And there is the conception that Murphy only bricks harddrives when there isn't a decent backup.
    Reply

Log in

Don't have an account? Sign up now