NAND endurance is something that always raises questions among those considering a move to solid state storage. Even though we have showed more than once that the endurance of today's MLC NAND based SSDs is more than enough for even enterprise workloads, the misconception of SSDs having a short lifespan still lives. Back in the day when we had 3Xnm MLC NAND with 5,000 P/E cycles, people were worried about wearing our their SSDs, although there was absolutely nothing to worry about. The move to ~20nm MLC NAND has reduced the available P/E cycles to 3,000, but that's still plenty.

We have tested MLC NAND endurance before but with the release of Samsung SSD 840, we had something new to test: TLC NAND. We have explained the architectural differences between SLC, MLC and TLC NAND several times by now, but I'll do a brief recap here (I strongly recommend reading the detailed explanation if you want to truly understand how TLC NAND works):

Bits per Cell 1 2 3
P/E Cycles (2Xnm) 100,000 3,000 1,000
Read Time 25us 50us ~75us
Program Time 200-300us 600-900us ~900-1350us
Erase Time 1.5-2ms 3ms ~4.5ms

The main difference is that MLC stores two bits per cell, whereas TLC stores three. This results in eight voltage states instead of four (also means that one TLC cell has eight possible data values). Voltages used to program the cell are usually between 15V and 18V, so there isn't exactly a lot room to play with when you need to fit twice as many voltage states within the same space. The problem is that when the cell gets cycled (i.e. programmed and erased), the room taken by one voltage state increases due to electron trapping and current leakage. TLC can't tolerate as much change in the voltage states as MLC can because there is less voltage headroom and you can't end up in a situation where two voltage states become one (the cell wouldn't give valid values because it doesn't know if it's programmed as "110" or "111" for example). Hence the endurance of TLC NAND is lower; it simply cannot be programmed and erased as many times as MLC NAND and thus you can't write as much to a TLC NAND based SSD.

No manufacturer has openly wanted to discuss the endurance of TLC, so the numbers we have seen before have been educated guesses. 1,000 - 1,500 P/E cycles is what I've heard for TLC NAND. The reality can also be different from what manufacturers claim as we discovered in the Intel SSD 335 (though there is a high probability that it's just a firmware bug), so actually testing the endruance is vital. 

There was one obstacle, though. Samsung does not report NAND writes like Intel does and without NAND writes we can't know for sure how much data is written to the NAND because of write amplification. Fortunately, there is a a workaround: I wrote incompressible 128KB sequential data (QD=1) to the drive and took down the duration of each run and the Wear Leveling Count (similar to Media Wear Indicator). If I know the average write speed and the duration, I can figure out how much I wrote to the drive. Sequential large block-size data should also result in write amplification near 1x because the data is sequential and thus doesn't fragment the drive. I then compared the amount of data I wrote to the WLC values I had recorded:

Samsung SSD 840 (250GB) Endurance Testing
Total Amount of Data Written 92,623 GiB
Total Amount of WLC Exhausted 34
Estimated Total Amount of P/E Cycles 1,064
Estimated Total Write Endurance 272,420 GiB

It seems that 1,000 P/E cycles is indeed accurate. The raw Wear Leveling Count seems to indicate the amount of exhausted P/E cycles as it's inversely proportional to the normalized WLC value and once it hits 1,000, the WLC will hit zero. 

Note that if Samsung's WLC is anything like Intel's Media Wear Indicator, when the normalized counter value drops to 0 there's still a good amount of endurance actually left on the NAND (it could be as high as another 20 - 30%). At least with Intel drives, the MWI hitting 0 is a suggestion that you may want to think about replacing the drive and not a warning of imminent failure.


1,000 P/E cycles may not sound much but when it's put into perspective, it's still plenty. Client workloads rarely exceed 10GiB of writes per day on average and write amplification should stay within reasonable magnitudes as well:

SSD Lifetime Estimation
NAND MLC—3K P/E Cycles TLC—1K P/E Cycles
NAND Capacity 128GiB 256GiB 128GiB 256GiB
Writes per Day 10GiB 10GiB 10GiB 10GiB
Write Amplification 3x 3x 3x 3x
Total Estimated Lifespan 35.0 years 70.1 years 11.7 years 23.4 years

Of course, if you write 20GiB a day, the estimated lifespan will be halved, although we are still looking at several years. Even with 30GiB of writes a day the 256GiB TLC drive should be sufficient in terms of endurance. Write amplification can also go over 10x if your workload is heavily random write centric, but that is more common in the enterprise side - client workloads are usually much lighter. 

Furthermore, it should be kept in mind that all SMART values that predict lifespan are conservative; it's highly unlikely that your drive will drop dead once the WLC or MWI hits zero. There is a great example at XtremeSystems where a 256GB Samsung SSD 830 is currently at nearly 6,000TiB of writes. Its WLC hit zero at 828TiB of writes, which means its endurance is over seven times higher than what the SMART values predicted. That doesn't mean all drives are as durable but especially SSDs from NAND manufacturers (e.g. Intel, Crucial/Micron, Samsung etc.) seem to be more durable than what the SMART values and datasheets indicate, which isn't a surprise given that they can cherry-pick the highest quality NAND chips.



View All Comments

  • hurleydood - Thursday, March 28, 2013 - link

    Here's the pic from CrystalDiskInfo Reply
  • Laststop311 - Monday, November 19, 2012 - link

    I knew people have been over acting the nand endurance issue. SSD's should last longer then hdd's with all their moving parts something is bound to fail on a hdd before you run out of writes on a ssd. In a week I probably use about 50GB of writes and thats a high estimate, more like 30GB a week unless a buncha good movies release that week. So my 256gb crucial c300 which is a 34nm MLC product should basically last me a lifetime. Reply
  • Laststop311 - Monday, November 19, 2012 - link

    Can anyone tell me how much longer the 34nm MLC nand should last compared to the 20nm MLC evaluated in this article? Reply
  • Kristian Vättö - Monday, November 19, 2012 - link

    IMFT's 34nm MLC NAND is rated at 5,000 P/E cycles, whereas IMFT's 20nm MLC NAND is rated at 3,000 cycles. Using the same math as in the article, a 256GiB SSD with 34nm MLC NAND would last for 116.8 years if you write 10GiB a day (WA=3x).

    Obviously, that's theoretical.
  • Ao1 - Monday, November 19, 2012 - link

    The theoretical P/E count is not just based on how many times the cell can be written too; it’s also based on the ability to retain data over time. Whilst it’s possible to write well beyond the theoretical P/E count no-one (publically) knows how long data retention will last once the theoretical P/E count has been exceeded. The full picture on endurance is not available until someone can show the relationship between the P/E count and the duration that a cell is subsequently able to retain data. Reply
  • htwingnut - Sunday, February 24, 2013 - link

    Any user that is writes a lot of data shouldn't even consider one of these drives. Just buy the 840 Pro or a Crucial M4. I see the 840 as more of a casual user's SSD. I put a 120GB 840 in each of my kids' netbooks. Over the course of a year they'll likely average less than 10GB writes a day and their systems go on hibernate once or twice a day. Most users that just browse the web, do basic MS Office stuff probably won't even encroach 10GB/day, and remember that's 10GB/day 7 days a week, 365 days a year.. Most users buy a new computer or laptop every 3-4 years anyhow, so I don't see it as a big deal. I wouldn't trust any HDD that is over 4-5 years old either. I have an Intel X25-m 80GB that's been used as a "casual" OS drive for about 3 years now, and it has less than 1TB of writes on the drive. It basically housed the OS and a few apps. Reply
  • Kaos11 - Tuesday, April 30, 2013 - link

    I would like to partition my 840 into two partitions as this is my normal setup on a Spinner.
    The question is does wear levelling treat the partitions as separate or is it smart enough to still wear level the whole SSD?
  • phil13 - Wednesday, December 11, 2013 - link

    I have one that failed, only show 0.9GB, SN: 000000000, Firmware: DXT06BO0, even samsung Magician software can see it, but say that there is no samsung SSD drive.
    It does look the firmware problem, all feel ok.
    Any solutions and help? appreciate, thanks.

Log in

Don't have an account? Sign up now