Lian Li PC-A76X Case Review: The Limits of Aluminum
by Dustin Sklavos on September 30, 2012 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- Lian Li
- HPTX
- E-ATX
Testing Methodology
For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
ATX Test Configuration | |
CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
Motherboard | Gigabyte GA-Z68MX-UD2H-B3 |
Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) |
Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
Accessories | Corsair Link |
CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z68MX-UD2H-B3 motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
61 Comments
View All Comments
SleepyItes - Monday, October 1, 2012 - link
I have owned several mid-tower Lian-Li cases over the years (PC-60, PC-6070, and my favorite the PC-7B plus). These all had a a very solid build quality and incredible ease of access features (removable hard drive cages, removable motherboard trays, etc.). The aluminum was thick, and there were panels and rails inside the case that provided excellent reinforcements. These things were rock solid.I just purchased the PC-Q18A for a Mini-ITX HTPC/Server. I have noticed the thinness of the aluminum and lack of reinforcement makes the case seem flimsy. Luckily this is a small case and doesn't need a lot of stability, but I can see how this would make a huge difference in a mid or full tower case. Maybe it's just the "Q" and "A" series cases, but it seems that Lian-Li is damaging its reputation by going with thin aluminum and not focusing on the physical stability of their cases. I have always recommended Lian-Li in the past (also Antec for budget steel), but if this is the way they are heading, I will probably look elsewhere for my future case purchases.
BlueReason - Monday, October 1, 2012 - link
I really enjoy your attention to detail in reviews, Dustin, though noise and thermal testing with a build configured without consideration for the case or utilization of its unfilled cooling options doesn't really reflect how someone would actually build their rig. A case is part of a kit that requires completion on part of the builder in a way that effectively suits the particular build. Often that requires the addition or relocation of fans, and the supplied options are a part of that case's potential. Merely putting a preconfigured build in a case unaltered out of the box and letting it ride really doesn't demonstrate much, because no thoughtful builder would do that.I would enjoy seeing case reviews being done where the build was completed, within reason (no modding, or anything rather elaborate), in a fair approximation of how you would build it if it were going to be your daily use rig. That could mean relocating fans, or even adding them. I realize you want to stick as close as possible to what the case provides, but by definition it is an unfinished part of a whole that requires additional parts that can differ per the build. This case is an extreme example due to the size/components disparity, but I'm also referring to case reviews in general.
Despite that, very nice review, as usual. =)
SleepyItes - Monday, October 1, 2012 - link
I agree. Part of the enjoyment of getting a nice case is tweaking it with new fans and/or fan controllers, heat sinks, noise dampening materials, etc. to meet your specific goals, whether that is overclocking, noise level, power usage, or just a good overall balance of these things.Because those goals are subjective, it would be hard to review from this perspective, but it would be nice to at least see an acknowledgement that, with a small amount of tweaking, much better cooling and noise reduction can be attained, and what would those minor tweaks be for this case?
superflex - Monday, October 1, 2012 - link
I still own my Li Li PCV1000 and love the case. While Lian Li does have crap English instructions, I find their quality to be 1st class. My 1000 has a giant scratch in the top where my 30 pound Hafler amplifier fell on it, but not a dent to be seen. Try that with your BitFenix case.pandemonium - Tuesday, October 2, 2012 - link
I've been considering replacing my case for a while now, since I've started overclocking and my PC6070 can't accomodate the required air flow without needing very loud fans; this has me thinking. The notes of the build quality being lack-luster is key here. Thanks!FrozenAsset - Tuesday, October 2, 2012 - link
I've built several computers using Lian Li cases. I'm disappointed to hear that the quality may have dropped. I can say that any build I've had with the cases pre-2010 have been top notch, stylish and convenient.As far as thermal conductivity, steel sucks. Unless you want to pay for a case made of Silver, Copper or Gold..., aluminum is your best bet. I seem to remember something about copper transferring heat better than aluminum, but aluminum dissipating it quicker than copper, which I think is why some heat sinks have a copper core.
deeppow - Wednesday, October 3, 2012 - link
I have several LL cases and have just bought another.The only problem I've found is LL has a total absences of support and never replies to their "support" email. Last case I ordered from Newegg had a broken fan blade. Newegg couldn't provide a new fan, they could only replace the whole case (they would cover all shipping costs both-ways). To save my time I just replaced the fan myself.
You get a new LL case, check it out completely for damage before starting a build. To be buying another LL case, I must think they are a quality case.
jginnane - Sunday, March 31, 2013 - link
I'm in a room surrounded by Lian Li cases -- half active, half in the process of new builds or refurbishment. One of the nicest things about LLs is that they're essentially immortal -- visit the Taiwanese website to get a new USB 3.0 set of headers for your external case ports. Presto -- good for another 10 years! My oldest Lian Li is awaiting its 4th m/b and CPU. I've built one B10 and 2 B12s this year, and was lucky to find a red PC8-FIR unopened (which I'm saving for my granddaughter's first system).I'm not having issues with heat like many posters here, probably because aside from using Seasonic and Corsair 850 watt Gold PSUs, I'm careful in component selection. Who needs more than 2 SSDs and 2 internal 2.5" 3-4TB HDs these days? The killer, the multiple-GPU system, is most times just a sad case of OCD. Instead of multiple monitors on each system -- been there, tried that -- I'm replacing the 27"Samsung 1920x1200 monitors with 27" and 30" 2560x1600 single monitors.
I can appreciate that some modest overclocking is fun, perhaps slightly profitable ... but who's paying the electric bill in your household? (I've dropped my electric bill 50% by using CREE LED downlights throughout the most heavily trafficked rooms.) Note that almost any serious overclocking can start adding 20-40% (and up) monthly to your system energy costs. (Use a Kill-a-Watt to test.) When you have a half dozen systems in 24/7 use, that's a serious no-no.
naisanza - Friday, June 7, 2013 - link
My Antec 1200 currently has three hard drives in it right now and an SSD. 5TB total storage. My 240 radiator currently takes up the rest of the bays.naisanza - Friday, June 7, 2013 - link
I was hoping the build quality would be denser. I was really set on getting this, because it's the best looking case with a full front panel, but the flimsy build and the irremovable hard drive cages is a pretty big deal breaker.