A Hybrid/Heterogeneous Design

Developing a processor with two different types of core is not a new concept – there are billions of smartphones that have exactly that inside them, running Android or iOS, as well as IoT and embedded systems. We’ve also seen it on Windows, cropping up on Qualcomm’s Windows on Snapdragon mobile notebooks, as well as Intel’s previous Lakefield design. Lakefield was the first x86 hybrid design in that context, and Alder Lake is the more mass-market realization of that plan.

A processor with two different types of core disrupts the typical view of how we might assume a computer works. At the basic level, it has been taught that a modern machine is consistent – every CPU has the same performance, processes the same data at the same rate, has the same latency to memory, the same latency to each other, and everything is equal. This is a straightforward homogenous design that’s very easy to write software for.

Once we start considering that not every core has the same latency to memory, moving up to a situation where there are different aspects of a chip that do different things at different speeds and efficiencies, now we move into a heterogeneous design scenario. In this instance, it becomes more complex to understand what resources are available, and how to use them in the best light. Obviously, it makes sense to make it all transparent to the user.

With Intel’s Alder Lake, we have two types of cores: high performance/P-cores, built on the Golden Cove microarchitecture, and high efficiency/E-cores, built on the Gracemont microarchitecture. Each of these cores are designed for different optimization points – P-cores have a super-wide performance window and go for peak performance, while E-cores focus on saving power at half the frequency, or lower, where the P-core might be inefficient.

This means that if there is a background task waiting on data, or something that isn’t latency-sensitive, it can work on the E-cores in the background and save power. When a user needs speed and power, the system can load up the P-cores with work so it can finish the fastest. Alternatively, if a workload is more throughput sensitive than latency-sensitive, it can be split across both P-cores and E-cores for peak throughput.

For performance, Intel lists a single P-core as ~19% better than a core in Rocket Lake 11th Gen, while a single E-core can offer better performance than a Comet Lake 10th Gen core. Efficiency is similarly aimed to be competitive, with Intel saying a Core i9-12900K with all 16C/24T running at a fixed 65 W will equal its previous generation Core i9-11900K 8C/16T flagship at 250 W. A lot of that will be that having more cores at a lower frequency is more efficient than a few cores at peak frequency (as we see in GPUs), however an effective 4x performance per watt improvement requires deeper investigation in our review.

As a result, the P-cores and E-cores look very different. A deeper explanation can be found in our Alder Lake microarchitecture deep dive, but the E-cores end up being much smaller, such that four of them are roughly in the same area as a single P-core. This creates an interesting dynamic, as Intel highlighted back at its Architecture Day: A single P-core provides the best latency-sensitive performance, but a group of E-cores would beat a P-core in performance per watt, arguably at the same performance level.

However, one big question in all of this is how these workloads end up on the right cores in the first place? Enter Thread Director (more on the next page).

A Word on L1, L2, and L3 Cache

Users with an astute eye will notice that Intel’s diagrams relating to core counts and cache amounts are representations, and some of the numbers on a deeper inspection need some explanation.

For the cores, the processor design is physically split into 10 segments.

A segment contains either a P-core or a set of four E-cores, due to their relative size and functionality. Each P-core has 1.25 MiB of private L2 cache, which a group of four E-cores has 2 MiB of shared L2 cache.

This is backed by a large shared L3 cache, totaling 30 MiB. Intel’s diagram shows that there are 10 LLC segments which should mean 3.0 MiB each, right? However, moving from Core i9 to Core i7, we only lose one segment (one group of four E-cores), so how come 5.0 MiB is lost from the total L3? Looking at the processor tables makes less sense.


Please note that the following is conjecture; we're awaiting confirmation from Intel that this is indeed the case.

It’s because there are more than 10 LLC slices – there’s actually 12 of them, and they’re each 2.5 MiB.  It’s likely that either each group of E-cores has two slices each, or there are extra ring stops for more cache.

Each of the P-cores has a 2.5 MiB slice of L3 cache, with eight cores making 20 MiB of the total. This leaves 10 MiB between two groups of four E-cores, suggesting that either each group has 5.0 MiB of L3 cache split into two 2.5 MiB slices, or there are two extra LLC slices on Intel’s interconnect.

Alder Lake Cache
AnandTech Cores
IGP Base
i9-12900K 8+8/24 8x1.25
30 770 125 241 $589
i9-12900KF 8+8/24 8x1.25
30 - 125 241 $564
i7-12700K 8+4/20 8x1.25
25 770 125 190 $409
i7-12700KF 8+4/20 8x1.25
25 - 125 190 $384
i5-12600K 6+4/20 6x1.25
20 770 125 150 $289
i5-12600KF 6+4/20 6.125
20 - 125 150 $264

This is important because moving from Core i9 to Core i7, we lose 4xE-cores, but also lose 5.0 MiB of L3 cache, making 25 MiB as listed in the table. Then from Core i7 to Core i5, two P-cores are lost, totaling another 5.0 MiB of L3 cache, going down to 20 MiB. So while Intel’s diagram shows 10 distinct core/LLC segments, there are actually 12. I suspect that if both sets of E-cores are disabled, so we end up with a processor with eight P-cores, 20 MiB of L3 cache will be shown.

Intel Announces 12th Gen Core Alder Lake Thread Director: Windows 11 Does It Best
Comments Locked


View All Comments

  • Zoolook - Saturday, October 30, 2021 - link

    On the contrary, I have built a number of systems for other people and maximum power is never requested, however, everyone wants a quiet desktop, even for gaming it's all about the GPU unless you "compete" with extreme fps shooters.
  • hansmuff - Thursday, October 28, 2021 - link

    Why bother? Because I want a quiet machine, and laptops are not quiet under heavy load. And I want a fast GPU that runs reasonably quiet (undervolted.) Laptops and great and all, but they're not the clear alternative to quiet desktop computing.
  • Flying Aardvark - Thursday, October 28, 2021 - link

    hansmuff- anything can be downclocked. If you're going to gimp your system, then why get the one with less potential if you change your mind? Intel has more potential in gaming if you go all out. Otherwise get your tablet.
  • Spunjji - Friday, October 29, 2021 - link

    Flying Aardvark - all indications so far are that AMD retains better perf/watt. We'll have to wait to see whether or not that applies to gaming, but it's disingenuous to suggest that one need "gimp your system" just to get acceptable thermals. It never used to be necessary with Intel, either, before they started clocking the nuts off their processors to keep up with Ryzen.

    "Otherwise get your tablet."
    Doesn't merit a response
  • Flying Aardvark - Saturday, October 30, 2021 - link

    Spunjji- but Intel is faster, all out. It makes no sense to neuter any system, you should be buying what has the most potential. Again, if you want the best perf/watt, get your M1 or your tablet of choice. Best 'perf per watt'. I'll be on an i9, which is faster than your system. And I can afford the extra $1 a month electric bill for the <5% time it's on and consuming high power.
  • TheinsanegamerN - Friday, October 29, 2021 - link

    Because a laptop with a dock is not only more expensive but also compromises cooling and noise compared to a desktop, doesnt ahve the expandability of a desktop and.....honestly why am I even trying to explain this. You knwo full well there are use cases for desktops beyond "ZOMG 1% IPC INCREASE GOOO 1000W COOLER"
  • TheinsanegamerN - Friday, October 29, 2021 - link

    Incorrect. Less efficiency means more heat/noise, more expensive coolers, and the need for more expensive motherboards. As a desktop owner Id otn want to waste money trying to cool down a hot running SOB.
  • PedroCBC - Saturday, October 30, 2021 - link

    I found it really funny that americans think that electric bills are the same all around the world, as if they were even within their own country. Yeah buddy, you are right, everyone can put a 1600W PSU and run it full throttle all day and pay without it take a reasonable amount of money.
  • Flying Aardvark - Saturday, October 30, 2021 - link

    PedroCBC- but you wouldn't be running at full throttle all day. Think!
  • yeeeeman - Friday, October 29, 2021 - link

    I don't think they will be double the power...for example 12600K needs 150W top TDP and it beats the 5800X which is at 142W...

Log in

Don't have an account? Sign up now